The Viking Solutions Adjustable Fishing Rod Carrier for Truck Beds - Aluminum - Black - 6 Rods # VS54FR does not allow for the rod holder angle to be adjusted but does allow for custom spacing between the holders. If you want the angle adjustment, then the Viking Solutions Fishing Rod Carrier for Truck Beds - Wall Mount - Aluminum - 10 Rods # VS84FR is a better option. view full answer...
The closest option we have available to what you are wanting is the CE Smith 80 Series Fishing Rod Holder # CE53680SA. This swivel-bottom, flush-mounted rod holder features a tube inner diameter of 1-7/8 inches and an overall length of 12 inches. It also has a sturdy stainless steel construction that will be resistant to any rust or corrosion over time.
This represents both the longest and largest inner tube diameter fishing rod holder we currently have. view full answer...
First thing you'll need is a roof rack installed on your 2010 Ford F-150 so that you can also install a fishing rod holder. For that you'd want the Rhino Rack part # RRVA150B-2, # RRRLKVA, and # DK150 that you referenced for the roof rack as this gives you a high quality roof rack that's easy to install and has aero shaped crossbars to minimize wind noise.
Then we have the Rhino Rack fishing rod holder part # RR574F which would work well to carry up to 8 rods. I attached a review video... view full answer...
For a basic roof rack system to haul fishing rods on your Corolla I would recommend the SportRack # SR1002 roof rack with 50" crossbars. To that add the Rhino-Rack # RR572 4-pole locking fishing rod holder.
Optionally you could use the Rhino-Rack # RR573F 5-pole holder or the Rhino-Rack # RR576F 11-pole holder. view full answer...
The Rhino-Rack Ski and Fishing Rod Holder # RR572 is a great way to carry Skis and Fishing Rods. I like that Rhino-Rack has several different sizes available to fit your needs to how many skis or rods you need to carry. The mounting system will attach to the Crosstrek's cross bars whether they are factory or aftermarket aero, square or round bars. The included locking feature makes this one stand out compared to others available.
If your son ever plans to carry a snowboard you might... view full answer...
The roof rack I recommend for a 2019 Ford Ranger is the Yakima JetStream Crossbar System which consists of part # Y00425, part # Y28TR, and part # Y06124. The Yakima JetStream Crossbar System is one of the best options on the market which has aero shaped crossbars which work to reduce wind noise/drag and rubber padded feet to protect the vehicle's finish.
The fishing rod carrier I recommend for the 2019 Ford Ranger with Yakima JetStream Crossbar System is the Yakima ReelDeal Rooftop Fishing... view full answer...
I suggest the Rhino-Rack Ski and Fishing Rod Carrier, depending on size needed either the # RR572, # RR573F, or the # RR576F . These are compatible with round, square, aero type, elliptical, and most factory crossbars with dimensions up to 3-1/2" wide and 1-1/2" tall. view full answer...
We have a great option for you but the Inno Fishing Rod Holder INIF9 will not fit your 2013 Jeep Wrangler Rubicon without modification. The Rod Holder mounts to the grab handles on your vehicle. With Jeep having unique grab handles this would not be a secure way to mount this. It mounts in the factory mounting holes of your grab handles. You would need to use hardware from your local hardware store to connect it to the roll top tube where your grab handles are located.
The best option... view full answer...
I do have an option for you but the photo you attached is a of a Thule Tracker FootBase which have since been discontinued. There are no longer parts available to use the Thule Tracker FootBase but you can still reuse the tracks you already have installed. I recommend the Rhino-Rack Roof Rack for Factory Tracks part # Y02-480B-NT as this is one of the most cost effective systems we have that will work with your tracks.
For a ski/fishing rod holder, I recommend the Rhino-Rack Ski and Fishing... view full answer...
The Rhino Rack Fishing Rod Holder part # RR574F can work great on the roof of your husbands 2003 Ford F-250 but there will need to be a roof rack installed as well since it can't attach to a naked roof.
The most cost effective rack would be the Rola part # R5007. This and the rod holder are easy to remove when not in use as well. view full answer...
For your 2000 Toyota Land Cruiser with the crossbars, I recommend the Rhino-Rack Multipurpose Holder, part # RRRMPHU. This system will hold several fishing rods, and with its versatility can be used to hold other items as well, like tools or paddles. This system comes with 2 cradles, and the hardware needed to install them.
In order to make sure that these holders clamp around your factory bars, I recommend measuring the height and the width of your bars to make sure they do not exceed... view full answer...
One of the most common alternate uses for ski and snowboard holders that are rubber clamp style is for fishing rods.
They fit comfortably in the same numbers as the number of skis that a rack can hold, though you can load a few more if you're comfortable with them being closer together.
Thule's best option for this use is the SnowPack 4 Ski model, part # TH7324 . This comes with integrated locks and larger-than-normal release buttons to make it easy to access. It also includes integrated... view full answer...
The CE Smith Rod Holder part # CE55108A only fits square rails and cannot fit round rails. For a similar holder that does fit round bars we have the Fishing Rod Holder - Vertical Clamp On # CE53725 that fits 1-5/8 inches diameter. view full answer...
The Thule SnowPack ski and snowboard carrier # TH7326 will handle thicknesses up to about 1-1/4 inches. Because the inside portion is made of soft rubber, I think it would work fine transporting fishing rods without any damage. It will fit round, square, aero/elliptical and most factory crossbars. The Pull Top is 34-1/2 inches wide so it should leave room on your roof rack to transport a surfboard.
Depending on how many fishing rods you will be transporting, a pretty neat alternative is... view full answer...
I have a roof rack fishing pole rack I can recommend for your, but the INIF6 can only be used on the interior of a vehicle. Instead you would want the Rhino Rack part # RR572 which is a ski rack that can also be used to carry several fishing rods. view full answer...
I have a similar solution, but the Thule Rod Vault does not have a T-bolt adapter to allow it to fit the top channels of your TracRac ladder rack so instead you'd want to go with the Yakima TopWater Rooftop Fishing Rod Carrier - Locking - 8 Fishing Poles # Y04088 and the SmarT-Slot Mounting Kit for Yakima TopWater Rooftop Fishing Pole Carrier # Y04094 and you'd be set. This is a similar carrier setup to the Thule. view full answer...
Yes, the Rhino-Rack Fishing Rod Carrier # RR574F does fit directly to your 2011 Chevy Avalanche's factory crossbars so it will install easily and not require any additional parts/adapters! view full answer...
You could certainly use a small step stool like the # SASA-10C-G to make it easier to reach the Rhino Rack # RR573F fishing rod holder. The step's 15-1/2 height would definitely help bring things within reach.
The option I really like is the Rightline Gear door step, part # RL100660. The step hangs off the door striker in your car door jamb, providing you with an easy to use, easy to store boost.
I've linked to some product demonstration videos that you might find helpful. view full answer...
The Yakima ReelDeal # Y04089 is the only rod holder that has the lifter brackets # Y8860037 to lift the carrier to gain extra clearance. You could get the Yakima FatCat # Y03095 which has lifter brackets built in. This is marketed towards ski and snowboards but can be used with fishing rods too. Either of these options will give you the clearance you need. view full answer...
Go To Results